VAR-SOM-MX8X based on NXP i.MX 8X
Evaluation Kit Quick Start Guide
11
13
14
15
17
21
20
24
30
31
28
18
19
22
25
23
12
16
26
27
29
1
2
3
4
5
6
7
8
9
10
Features:
1. Power ON Switch (SW7)
2. 12V DC In Jack (J24)
3. USB Debug (J29)
4. micro SD Card slot (J28)
5. SATA Power (J22)
6. micro SATA Connector (J27)
7. USB 3.0 OTG (J26)
8. USB 2.0 Host (J23)
9. Gigabit Ethernet #0 (J21)
10. Gigabit Ethernet #1 (J20)
11. MIPI-CSI Camera connector [optional] (J19)
12. Miscellaneous Header (J17)
13. HDMI/ Parallel Camera connector [optional] (J13)
14. Mini PCI Express Connector (J15)
15. DSI/QSPI/ADC Header (J3)
16. SOM Connector (J1)
17. LVDS#B Header (J5)
18. LVDS#A Header (J7)
19. Fan Power Connector (J9)
20. Digital Microphone (U1)
21. Resistive Touch (J10)
22. Capacitive Touch (J11)
23. User Buttons (SW1, SW2, SW4)
24. Line-In Connector (J12)
25. Headphones Connector (J14)
26. Boot Select Switch (SW3)
27. SAI/I2C/SPI/CAN Header (J16)
28. Reset Button (SW5)
29. PWR Select Switch (SW6)
30. UART/PWM Header (J18)
31. RTC Battery Holder (JBT1)
Evaluation kit initial Setup
1.
Carefully remove the 7” LCD and
Symphony-Board from the package.
2.
Connect the 7” LCD Display and Touch
cables to the Evaluation Kit connectors J7,
J11 respectively.
Note
:
Display cable
– connect the cable with the red
wire on pin 1.
Touch cable
– connect the cable with the
metal contacts facing down.
3. Plug the USB type A to micro B cable between
the USB debug connector (J29) and a PC
USB port.
