30
CLOSET ISLANDS
A:
After locating in your closet where your island will be placed,
take the first outside panel and stand it upright in that precise
location.
B:
The second side panel should
be placed parallel from the first
in the same upright position
(Diagram A).
C:
Lock the 3/4” back panel
to separate the two halves
of the island sections
(Diagram B).
D:
Locate the first
set of locking
shelves and
fasten to the top
and install toe
kicks (Diagram C).
TIP:
Be sure to attach toe kicks before bottom shelf for ease of
installation of both parts. Review page 21 for toe kick installation.
E:
Attach bottom
shelves above toe
kick (Diagram D).
PANEL 1
PANEL 2
Diagram A
Diagram B
BO
TT
OM SHELF
BO
TT
OM SHELF
Diagram D
BACK
PANEL
TOP SHELF
TOP SHELF
Diagram C
TOE KICK
TOE KICK
F:
Repeat steps 1-4 on each of the remaining panels.
G:
Included in your
CLOSETS.COM system is
the island countertop.
Place the counter on top
of the island and secure
with 1 ¼” flat black screw
through the top locking
shelf (Diagram E).
H:
If the island is one-sided,
(drawers on only one side)
it will need to be attached to
the floor. Ensure the island is
placed appropriately in your closet
space. Use ‘L’ brackets, under bottom
shelf attached to side panels, to
secure unit to floor if one-sided.
COUNTERTOP
Diagram E
1 ¼” Flat Black Screw
ISLAND INSTALLATION
If your new closet system came with an island, the following directions will help ensure proper installation for maximum usability
and functionality.
I:
Finish by installing drawers and making necessary
adjustments for alignment.
