closet.com Organization Delivered Installation Instruction Download Page 3

Page: 3 / 36

The detailed installation instructions that follow are designed to make your installation smooth and flawless. The

indexing will help you to find the specific answer and/or illustration you need to understand the engineering and

assembly process.

Each part is labeled with the closet, wall and section where it is to be installed. These labels tie to the installation plan you

received with the project making the staging of the job and the install process clear. If you can’t find the answer you are

looking for you can call 844-431-6690 and speak with a professional in our Customer Service Department.

Continuous improvement in our operation is taken seriously. If anything in this publication is not clear or complete,

please let us know.

Sincerely,

The Closets.com Team

953 North Larch Avenue Elmhurst, IL 60126

Main Phone: 844-431-6690

Fax: 630-832-6878

Business Hours: 8:00 AM to 5:00 PM Central

Summary of Contents for Organization Delivered





































Search results

Summary of Contents for Organization Delivered

Reviews:

Related manuals for Organization Delivered

Brands by name

Popular brands

closet.com Organization Delivered, Installation Instruction

Search results

Summary of Contents for Organization Delivered

Reviews:

Related manuals for Organization Delivered

Brands by name

Popular brands