© 2019 Closets.com
19
SUSPENDED CLOSET SYSTEMS
FLOOR-MOUNT INSTALLATION CONCEPTS AND INSTRUCTIONS
We have devised what we think is a clear method and chronology for installing your organizational system. The
floor-based system is designed to be placed against a wall. It is secured to the wall by use of a suspension rail
and triangular corner brackets. Additionally, all closet units will extend and are supported by the floor. Each
section includes a base with toe kick.
Systems are made of vertical elements (panels) and horizontal elements (shelves). Locate each panel that is
included with your system. Each part has a sticker on it that corresponds to a part listed on the drawing. If you
have a one section system you will have two panels, a two section system will have three panels, a three section
system will have four, and so on.
PREPARING THE SPACE
UNPACKING YOUR PRODUCT
Start with a clean space near where you will be installing your
system. De-install any existing systems that may be in place. Spackle
and paint.
Unpack items, placing the items nearby and keeping them grouped
together. Inspect all parts and pieces as they are unpacked for any
damage or missing parts.
Report any missing or damaged parts immediately to
customer service.
Note:
We recommend you read through this manual entirely before
you install your system. We strongly recommend that the product be
assembled with the help of at least one additional person.
With your purchase
you will have
a drawing that
illustrates your
product in both a
plan and elevation
view. Locate your
drawing included in
your hardware box
and set it out in front
somewhere you can
easily see it.
Systems are made of vertical elements (panels) and horizontal
elements (shelves). Locate each panel that is included with your
system. Each part has a sticker on it that corresponds to a part listed
on the drawing. If you have a one section system you will have two
panels, a two section system will have three panels, a three section
system will have four, and so on.
TOOLS NEEDED FOR INSTALLATION
NO 2 PHILLIPS SCREW DRIVER
CORDLESS DRILL
NO 2 PHILLIPS DRIVER BIT FOR DRILL
LEVEL
STUD FINDER
