CLIVET CSRN-XHE2 Series, Manual

Page: 61 / 92

61
M A I N T E N A N C E
Saftey
Operate in compliance with safety regulations in force.
Use single protection devices: gloves, glasses etc.
Generality
Maintenance must be carried out authorised after-sales assistance
centres or by specialised personnel.
Maintenance allows:

maintaining the unit efficient

reduce deterioration speed to which each equipment is subject
in time

collect information and data to understand the efficiency state
of the unit and prevent possible faults
WARNING
 Before checking, please verify the following:
 the electrical power supply line should be isolated at the
beginning
 the line isolator device is open, locked and equipped with the
suitable warning sign
 make sure no tension is present
 After switching the power off, wait at least 5 minutes before
accessing to the electrical panel or any other electrical
component.

Before accessing check with a multimeter that there are no
residual stresses.
Frequency of interventions
Perform an inspection every 6 months.
However, frequency depends on the type of use.
Pan inspections at close intervals in the event of:
 frequent use (continuous or very intermittent use, near the
operating limits, etc)

critical use (service necessary)
Unit booklet
It’s advisable to create a unit booklet to take notes of the unit
interventions.
In this way it will be easier to adequately note the various
interventions and aid any troubleshooting.
Report on the booklet:

date

intervention description
 carried out measures etc.