CLIVET CSRN-XHE2 Series, Manual

Page: 15 / 92

15
1 remove the unit supply flange closing.
2 approach the unit to the Gas Module.
3 match the supply flanges by means of the supplied terminals.
4 tighten screws
5 guarantee the absence of air bypass.
A. Apply the flat adhesive gasket15x5 on the Gas Module flange perimeter to guarantee the absence
of air bypass.
B.
Fix with screws the flue supporting bracket to the GM frontal panel
C.
Fix the extensions with clamps to the flue supporting bracket
D. Fix the suction terminals in ambient and the fuel components (curves, extensions, terminals) by the
corresponding gaskets