CLIVET CSRN-XHE2 Series, Manual

Page: 12 / 92

12
S E L E C T I N G T H E I N S TA L L AT I O N S I T E
Positioning

Installation must be in accordance with local regulations. If
they do not exist, follow EN378 .
During positioning consider these elements:

customer approval

unit weight and bearing point capacity

safe accessible position
 functional spaces

spaces for the air intake/exhaust
 electrical connections

max. distance allowed by the electrical connections
 water connections
Functional spaces
Functional spaces are designed to:
 guarantee good unit operation

carry out maintenance operations
 protect authorized operators and exposed people

Respect all functional spaces indicated in the TECHNICAL
INFORMATION section.
Positioning
Units are designed to be installed:
 EXTERNAL

in fixed positions

Put the unit in a position where any leaking gas cannot enter
buildings or stagnate in closed areas. In the latter case,
observe the rules for machinery rooms (ventilation, leak
detection, etc.).
Installation standards:

install the unit raised from the ground
 bearing points aligned and leveled
 discharged condensation water must not cause harm/danger
to people and property
 the accumulation of snow must not cause clogging of the
coils

avoid installations in places subject to flooding
Limit vibration transmission:
 use anti-vibration devices or neoprene strips on the unit
support points
 install flexible joints on the hydraulic and aeraulic connections
Protect the unit with suitable fence in order to avoid access to
unauthorised personnel (children, vandals, etc.)
A correct circulation of the air is mandatory to guarantee the
good unit operating..
The unit must be level.
Steel structure
Concrete floor
1 2 cm thick neoprene strips
2 concrete
floor
3 floor
1 anti-vibration devices
2 steel structure
3 steel structure