CLIVET CSRN-XHE2 Series, Manual

Page: 24 / 92

24
P.C. configuration
connect P.C. and main module with LAN cable
check in the taskbar that the connection is active
Open
Control panel
and select
Network and sharing center
Select
Modify board setting
Select
Local area connection (LAN)
Select Internet protocol version 4 (TPC) IPV4 and enter Property
Set the IP address
192.168.1.100
Set Subnet mask as
255.255.255.0
confirm (OK)
Enter
Start
(Windows button).
Write the command
cmd
and enter/do it
Write and run the command
Ping 192.168.1.42
if will appear dawn an answer string, the connection is ok
enter the browser (Crhome, Firefox ecc)
Write and run the command http:/192.168.1.42
Userid = WEB
Password = SBTAdmin!
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
P.C. - not supplied Optional keypad
Shift RJ45 from T-IP to T-HI
RJ45 : standard connection