25
CM7015
Once you have the DIP switches in the correct position for the desired channel, re-insert
the batteries and return the battery tray to its position – making sure to tighten the
screw to ensure no moisture finds its way inside.
To check that the sensor is being received, press the
CHANNEL
key on the Display
Console to move between available sensors in numerical order from 1 to 8. If your
sensor is not picked up automatically within 10 minutes, follow the Sensor Search
procedure detailed on Page 17.
Low Battery Indicator
Over time, the batteries in the CM7 Sensor will run down and need to be replaced. We
recommend not using rechargeable batteries, as these do not tend to be compatible with
this type of device. For the best results, lithium-based batteries will be most dependable
and have the longest lifespan. When the battery power of the CM7 is low, a battery
icon will display next to the sensor’s temperature measurement on the indoor console to
indicate that replacements are required.
Adding More Sensors
Adding extra CM7 sensors to your CM7015 later down the line is as straightforward as
inserting batteries into a new sensor and ensuring that it is set to a different channel
to any others currently in place. Once the sensor is powered up, use the Sensor Search
Mode detailed on Page 17 to prompt the console to look for any available sensors. The
console will then look for any sensors within range for a period of 10 minutes, during
which all active sensors should be received.
