17
CM7015
Console Key Tone On/Off
The beeping sound emitted by the console can be helpful in making sure that key presses
have been registered. However, this can be turned off if preferred. To do so, simply
press and hold the
HISTORY
key for 3 seconds while on the home screen until BUZZ
OFF
is displayed at the top of the console confirming this has been disabled. To turn
the sound back on, just do the same again and it will be re-enabled. For the purposes of
this manual we’ll assume that key tones are enabled and will reference pressing certain
keys until a beep is heard.
Channel Selection
The Channel ID for the selected sensor will be shown on the second row of the Display
Console. This row will display temperature and humidity measurements provided by the
CM7 Sensor that is set to this channel.
Press the
CHANNEL
key to move between available sensors in sequential order from
1 to 8. After the final sensor has been selected, press the
CHANNEL
key on more time
and the
icon will be displayed next to the Channel ID. This means that the Sensor
Scroll Mode is active, which will set the console to automatically scroll between all active
sensors in 5-second intervals. To turn this mode off, simply press the
CHANNEL
key
again to navigate to the desired sensor instead.
Sensor Search Mode
If communication is ever lost between your Display Console and CM7 Sensors, it may be
necessary to prompt the console to re-establish these connections.
If a specific channel is lost – press the
CHANNEL
key until the Channel ID for the missing
sensor is displayed, then press and hold the
CHANNEL
key for 3 seconds to enter the
Sensor Search Mode. You will see that CH is flashing followed by a number from 1 to
8 – make sure that this corresponds to the sensor you are looking to re-establish the
connection with, then press the
SET
key to prompt the Display Console to do so. The
searching icon
will display next to the Channel ID for up to 3 minutes, showing that
the console is now looking for signals from this Channel ID. Once the signal has been
found, remote readings will return and the searching icon will no longer be displayed.
