28
CM7015
Min/Max Clearing Mode
The Min/Max Clearing feature will prompt the CM7015 to automatically clear all
minimum and maximum records each day at midnight. This means you will not need
to clear these manually, and can simply take readings at whatever point in the day is
desired.
To enable/disable this feature, navigate through the Setup Menu and toggle this on/off
as preferred. When this feature is enabled, the CL24 icon will be shown directly below
the rainfall section of the Display Console. Further information on how to access this
feature can be found on Page 20.
9. Alarm Mode
The CM7015 can utilise various alarms, including customisable alerts for time,
temperature, humidity, dew point and rainfall. Alarms can be set for outdoor
temperature and humidity, but only for sensors set to Channel 1, so if you are looking
to make use of external alarms please ensure that the sensor to be used is set correctly
using the Channel Selector.
Alarm Configuration
To view current alarm settings (regardless of whether the alarms are active or not) press
and hold the
ALARM
key for 3 seconds to enter Alarm Mode and view the High Alarm
Page – ‘HI’ should be displayed in the Date section of the console.
Press the
ALARM
key a second time to view Low Alarm settings – you should now see
that ‘LOW’ is displayed in the Date section of the console while these are showing.
Pressing the
ALARM
key a third time will return back to the home screen.
Setting Alarms
To set an alarm, first navigate to the Alarm Mode by pressing and holding the
ALARM
key down for 3 seconds, as detailed above. Now, press and hold the
SET
key for 3
seconds to enter the menu where you can navigate between various parameters to set
different High or Low alarms.
