20
CM7015
Min/Max Clearing:
The Min/Max Clearing feature causes the console to automatically
reset all minimum and maximum values at midnight. Enabling this feature can therefore
make it easier to check the highs and lows for temperature and humidity each day. If
you’d prefer to manually reset these measurements to take readings over a different
time period (for example – keeping track of the highest temperature over a week) this
feature can be disabled at any time. Pressing the
key will toggle this feature on (with
the CL24 icon displayed) or off (with this section empty). More information on minimum
and maximum readings can be found on Page 27.
Temperature Units:
Select the desired units of measurement for temperature. Use the
key to toggle between C (Celsius) and F (Fahrenheit) while either icon is flashing next to
the temperature readings.
Rainfall Units:
Select the desired units of measurement for rainfall. Use the
key to
toggle between mm (Millimetres) and inch (Inches) while either icon is flashing next to
the rainfall readings. Please note, if your Rain Gauge is not connected, this menu option
will not appear.
Custom Display Mode
The second function of the
SET
key is using it to access a separate menu that will allow
you to customise certain parameters shown on the Display Console. To enter the Custom
Display mode, press (do not hold) the
SET
key so that the console beeps. Pressing the
SET
key again will advance to the next customisable section.
Pressing the
SNOOZE/LIGHT
key at any point will exit this mode and revert to the home
screen. When one of these options is changed, it will affect which setting is displayed
as default on the home screen allowing you to customise your Display Console to your
preference.
