8
CM7015
4. Getting Started
What’s in the Box?
•
Indoor Display Console
•
CM7 Temperature & Humidity Sensor – for use indoors or outdoors
•
Outdoor Rain Gauge
•
Rain Gauge Filter
•
2 x U-Bolts & 4 x Nuts for Pole Mounting
•
4 x Self-Tapping Screws for Wall Mounting
•
User Guide
Getting Set Up
Setting up your new Wireless Rain Gauge is almost as simple as inserting batteries
into each part and making sure that your Rain Gauge and CM7 Sensor are both within
range of your Display Console. Before doing so though, there are a few steps worth
following in order to customise your setup and get the most out of your CM7015. We’d
recommend running through the setup guide in this order as this will ensure that nothing
important is missed.
Setting up your Rain Gauge
First of all, you’ll need to insert batteries into the Rain Gauge. The battery port is found
atop the base of the Rain Gauge, so will not be immediately accessible. Carefully rotate the
rain cone anti-clockwise to unlock it from the base, then pull it firmly upwards to remove
the cone and expose the tipping mechanism.
