30
CM7015
As an example, to set an alarm for when indoor humidity reaches as high as 80%:
•
Press and hold the
ALARM
key for 3 seconds to enter the Alarm Mode.
•
Then, press and hold the
SET
key for 3 seconds to enter the menu for setting
alarms.
•
Now press (do not hold) the
SET
key to navigate to the desired parameter, which
should start flashing. In this example we’re looking for the indoor humidity High
Alarm, so we’ll need to press the
SET
key 10 times to navigate past the other types
of alarm available.
•
While ‘HI’ is displayed at the top of the screen and the indoor humidity value is
flashing, use the
or
keys to adjust this alarm setting to 80%.
•
Once the desired value has been reached, press the
ALARM
key and the High
Alarm icon should now display next to the indoor humidity value confirming that
the alarm has been set. Let the console automatically return back to the home
screen and you should see that the High Alarm icon is now displayed next to the
indoor humidity value – signifying that this alarm is active.
Disabling Alarms
To disable any alarm settings in order to prevent them from sounding in future, follow
the above steps to navigate to the relevant parameter and simply use the
ALARM
key
to toggle the alarm off again, so that the alarm icon
is not displaying. If you want to
cancel all active alarms, just make sure that none of the parameters on your console have
active alarm icons shown next to them!
To leave the Alarm Mode at any point and return to the home screen, just press the
SNOOZE/LIGHT
key found on top of the console.
Snooze Mode
When an alarm sounds, pressing the
SNOOZE/LIGHT
key on top of the console will
silence the alarm for 5 minutes, leaving only a flashing icon next to the related parameter.
This will continue until the alarm is toggled off completely using the steps detailed above.
