C L I M AT E M A S T E R WAT E R - S O U R C E H E AT P U M P S
TSM/TSL Vertical Stack
R e v. : J a n u a r y 1 8 , 2 0 2 1
C l i m a t e M a s t e r Wa t e r-S o u rc e H e a t P u m p s
26
Supply Grille Installation
Supply Grille Installation -
Cabinet opening should be
sealed to wall. Use canvas-type flex collar or field supplied
duct extension if needed.
Refer to Table 1 to make sure that the grille size is correct
based on the type and size of the supply air grille.
• Install the grille into the cabinet discharge opening.
Assure that the grille flange rests against the drywall
covering the cabinet. Do not caulk.
• Secure the grille to the drywall with the screws provided.
Unit Size Single Discharge Double Discharge
Triple Discharge
TSM09
12” x 12” (305 x
305)
12” x 6” (305 x 152)
N/A
TSM12
12” x 12” (305 x
305)
12” x 6” (305 x 152)
N/A
TSM15
12” x 12” (305 x
305)
12” x 6” (305 x 152) 12” x 6” (305 x 152)
TSM18
N/A
12” x 12” (305 x 305) 12” x 6” (305 x 152)
TSM24
N/A
16” x 8” (406 x 203) 16” x 8” (406 x 203)
TSM30
N/A
16” x * (406 x –)
16” x 8” (406 x 203)
TSM36
N/A
16” x * (406 x –)
16” x * (406 x –)
Note - If custom grille sizes are used, area should equal above.
* – 88” (2235) Cabinet = 16” (406); 80” (2032) Cabinet = 12” (305)
Table 1: Supply Grille Sizes and Arrangements
