Clevo X170SM-G Manual Download Page 128

Page: 128 / 324

BIOS Utilities

5 - 4 Updating the BIOS / CPU

UEFI Boot

UEFI (Unified Extensible Firmware Interface) is an advanced firmware standard
supporting fast startup.

With UEFI Boot prompts at boot to press

(to access the BIOS) or

(to access

Boot options) will not appear. However you can still press

to enter the setup, or

to choose the preferred boot device, if you press the key immediately the system

boots up.

To enter

BIOS

, turn on the computer and press F2 as the system “Boots up”.

If the computer is already on, reboot using the

Ctrl + Alt + Delete

combination and

then hold down

when prompted. The

BIOS

main menu will appear. To see the

boot options press

and choose your preferred boot device.

Summary of Contents for X170SM-G





































































































































































































































































































































Search results

Summary of Contents for X170SM-G

Reviews:

Related manuals for X170SM-G

Brands by name

Popular brands

Clevo X170SM-G, Manual

Search results

Summary of Contents for X170SM-G

Reviews:

Related manuals for X170SM-G

Brands by name

Popular brands