Clevo X170SM-G Manual Download Page 114

Page: 114 / 324

Drivers & Utilities

4 - 4 Driver Installation

Win 10 (64-bit) Driver

Page #

Win 10 (64-bit) - Optional Items

Page #

Chipset

Page 4 - 7

SATA Mode Setup (Optane™, RAID or AHCI)

Page 6 - 2

Serial IO

Page 4 - 7

Wireless LAN Module

Page 6 - 15

NVIDIA Video (VGA)

Page 4 - 8

Bluetooth & WLAN Combo Module

Page 6 - 21

NVIDIA Apps

Page 4 - 8

Fingerprint Reader Module

Page 6 - 35

LAN

Page 4 - 8

Intel® Software Guard Extensions Driver

Page 6 - 38

Card Reader

Page 4 - 9

Intel® Rapid Storage Technology

Page 6 - 39

Intel® HID Filter Driver

Page 4 - 9

PC Camera

(no driver installation required)

Page 6 - 75

Control Center

Page 4 - 9

Trusted Platform Module

(no driver installation

required)

Page 6 - 81

MEI Driver

Page 4 - 9

All drivers provided are for the Windows 10 (64-bit) operating system.

Note that you need to install both the WLAN & Bluetooth drivers for the

Intel WLAN & Bluetooth Combo module.

Note: The Killer Wireless LAN driver will be installed

as part of the LAN

driver installation process (see

“Killler WLAN Combo Driver” on page 6

- 17

), but you will also need to install the Bluetooth driver.

Intel® Dynamic Platform Driver

Page 4 - 10

Thunderbolt Driver

Page 4 - 10

ANX Driver

Page 4 - 10

Creative Sound Blaster Atlas Audio

Page 4 - 10

Page 6 - 38

Table 4 - 1

- Driver Installation

Audio

Page 4 - 11

Summary of Contents for X170SM-G





































































































































































































































































































































Search results

Summary of Contents for X170SM-G

Reviews:

Related manuals for X170SM-G

Brands by name

Popular brands

Clevo X170SM-G, Manual

Search results

Summary of Contents for X170SM-G

Reviews:

Related manuals for X170SM-G

Brands by name

Popular brands