Clevo X170SM-G Manual Download Page 140

Page: 140 / 324

BIOS Utilities

5 - 16 Setup Utility - Advanced Menu

Intel Optane Options

Intel® Optane™

is a combination of a compatible memory device and

Intel Rapid

Technology software

. This combination is designed to speed up your system per-

formance by caching boot data, executables, frequently accessed data and system
page files to an non volatile, low latency Intel® Optane™ SSD.
•

Intel® Optane™ Memory Series

- A single Intel® Optane™ SSD

automati-

cally configured as a single volume disk,

designed to speed up your system

without any data storage options.

Clearing Intel Optane

If you need to clear Intel Optane Memory data then follow the process below,

how-

ever note you will need to back up your system first

as the procedure will result

in the system being required to be reinstalled and data and files will be lost in the
process.

Go to the BIOS and select Bios setup > Advanced > Intel Rapid Storage Technol-
ogy and select Intel Optane.

Select

Disable

Select

Yes

when prompted “Are you sue you want to disable?”

Select

Disable

and the system will clear the data.

The system will then return to the Intel Rapid Storage Technology menu.

Summary of Contents for X170SM-G





































































































































































































































































































































Search results

Summary of Contents for X170SM-G

Reviews:

Related manuals for X170SM-G

Brands by name

Popular brands

Clevo X170SM-G, Manual

Search results

Summary of Contents for X170SM-G

Reviews:

Related manuals for X170SM-G

Brands by name

Popular brands