manualshive.com logo in svg

Clevo E4120, User Manual

The Clevo E4120 is a cutting-edge device designed for various computing needs. In order to get the most out of this versatile device, users can easily access the comprehensive User Manual for free. Simply download the manual from our website, manualshive.com, to explore all its features and functionalities.

Share
Download
background image

Power Management

3 - 2 The Power Sources

3

The Power Sources

The computer can be powered by either an AC/DC adapter or a battery pack.

AC/DC Adapter

Use only the AC/DC adapter that comes with your computer. The wrong type of AC/
DC adapter will damage the computer and its components.

1.

Attach the AC/DC adapter to the DC-in jack on the left of the computer.

2.

Plug the AC power cord into an outlet, and then connect the AC power cord to the 
AC/DC adapter.

3.

Raise the lid/LCD to a comfortable viewing angle.

4.

Press the power button to turn “On”.

Battery

The battery allows you to use your computer while you are on the road or when an
electrical outlet is unavailable. Battery life varies depending on the applications and
the configuration you're using. 

To increase battery life, let the battery discharge

completely before recharging 

(see

 

“How do I completely discharge the battery?”

on page 3 - 15

).

We recommend that you do not remove the battery. For more information on the bat-
tery, please refer to 

“Battery Information” on page 3 - 11

.

Summary of Contents for E4120









































































































































































































































Reviews:

No comments

Related manuals for E4120

Panasonic FZ-55 Series Getting Started preview
FZ-55 Series
Brand: Panasonic Pages: 36
Panasonic FZ-55 Series Quick Start Manual preview
FZ-55 Series
Brand: Panasonic Pages: 2
Panasonic CF-Y5 Series Supplementary Instructions preview
CF-Y5 Series
Brand: Panasonic Pages: 4
Panasonic CF-T5 Series Operating Instructions Manual preview
CF-T5 Series
Brand: Panasonic Pages: 40
Panasonic CF-71 Series Operating Instructions Manual preview
CF-71 Series
Brand: Panasonic Pages: 28
Panasonic CF-T8 series Supplementary Instructions Manual preview
CF-T8 series
Brand: Panasonic Pages: 20
Panasonic CF-T7 Series Specification preview
CF-T7 Series
Brand: Panasonic Pages: 2
Panasonic CF-74 Series Supplementary Instructions Manual preview
CF-74 Series
Brand: Panasonic Pages: 56
Panasonic Toughbook CF-18 Series Operating Instructions Manual preview
Toughbook CF-18 Series
Brand: Panasonic Pages: 48
Razer BLADE Quick Start Manual preview
BLADE
Brand: Razer Pages: 34
Panasonic Toughbook CF-19KHRAG2M Reference Manual preview
Toughbook CF-19KHRAG2M
Brand: Panasonic Pages: 91
Panasonic Toughbook CF-18BCAGCMM Operating Instructions Manual preview
Toughbook CF-18BCAGCMM
Brand: Panasonic Pages: 52
Panasonic Toughbook CF-H2ALFHA1M Operating Instructions Manual preview
Toughbook CF-H2ALFHA1M
Brand: Panasonic Pages: 36
Dynatech scieneo. amplio VI User Manual preview
scieneo. amplio VI
Brand: Dynatech Pages: 52
Acer Aspire 5670 Service Manual preview
Aspire 5670
Brand: Acer Pages: 135
Acer TravelMate 4070 Manual Do Utilizador preview
TravelMate 4070
Brand: Acer Pages: 80
Acer TravelMate 4070 Guía Del Usuario preview
TravelMate 4070
Brand: Acer Pages: 77
Acer TravelMate 4070 Manuel D'Utilisation preview
TravelMate 4070
Brand: Acer Pages: 79

Brands by name

Popular brands

Load more brands