SUPERVISOR CONTROLS
56
Tennant T300 (03- 2015)
8. To enable the login number at start up, press the
“Enable Login” button (Figure 147). This button will
change from “Enable Login” to “Disable Login”.
This will allow you to disable a required login
number at start up as described in step 13.
FIG. 147
9. Now at machine start up, a login screen will display
(Figure 148). The new user will need to enter their
assigned login number to operate machine
FIG. 148
10. When the user is done operating the machine, it is
recommended to have the user log out by pressing
the Settings button, then pressing the logout button
(Figure 149). Turning the key to the off position is
another way to also logout.
FIG. 149
11. Use the edit, copy and delete profile buttons to
manage the current user profiles (Figure 150).
For example, to edit any user profile settings
including the factory-assigned default supervisor
login number, press the “Edit Profile” button
FIG. 150
To change the factory-assigned default supervisor
login number, press the Supervisor button. Then
press the “DEFAULT SUPER” profile button to
enter the profile settings (Figure 151 ).
FIG. 151
Within the profile settings screen, press the
factory-assigned login number and enter a new
login number (Figure 152).
Press the blinking save icon to save the new
login number.
FIG. 152
