OPERATION
26
Tennant T300 (02- 2017)
HOUR METER
The hour meter records the number of hours the
machine has been operated. Use the hour meter to
perform specific maintenance procedures and to record
service history (Figure 75).
FIG. 75
DRAINING TANKS
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
DRAINING RECOVERY TANK
Drain and clean the recovery tank daily and between
solution tank refills.
1. Transport the machine to drain area.
2. For models equipped with drain hose caps, hold
the hose upward, remove cap then slowly lower
hose to drain. For models equipped with flow
control valve drain hose, lower hose and slowly
open valve to drain (Figure 76).
FIG. 76
NOTE:
When using a bucket to drain the machine, do
not use the same bucket to fill the solution tank.
3. Remove and clean the float shut-off screen
(Figure 77).
FIG. 77
4. Remove the debris tray and empty (Figure 78).
FIG. 78
5. Rinse out the recovery tank with clean water and
wipe clean of any soil residue (Figure 79).
FIG. 79
