OPERATION
12
Tennant T300 (03- 2015)
MACHINE SETUP
ATTACHING SQUEEGEE ASSEMBLY
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
1. Lift the squeegee mount bracket to the raised
position. Place toe under pedal to lift (Figure 5).
FIG. 5
2. Mount the squeegee assembly to the squeegee
mount bracket (Figure 6). Tighten knobs to secure
squeegee assembly to bracket.
FIG. 6
3. Connect the vacuum hose to the squeegee
assembly (Figure 7).
FIG. 7
INSTALLING BRUSH/PAD - Insta-Click Magnetic Disk
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
WARNING: Magnetic Field Hazard. Magnetic
pad driver/brush can be harmful to pacemaker
wearers or medical implants.
1. Step down on the scrub head lift pedal to raise the
scrub head off the floor (Figure 8).
FIG. 8
2. Attach the pad to the pad driver before installing
the driver (Figure 9). Secure pad with centerlock.
FOR SAFETY: Do not operate machine with pads
or accessories not supplied or approved by
Tennant. The use of other pads may impair safety.
FIG. 9
3. Place the pad driver/brush under the scrub head
and lift into position. The Insta-Click pad
driver/brush will automatically click into position
(Figure 10).
FIG. 10
