MAINTENANCE
32
Tennant T300 (02- 2016)
MACHINE MAINTENANCE
To keep the machine in good working condition, simply
perform the following maintenance procedures.
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
FOR SAFETY: When servicing machine wear
personal protection equipment as needed. All
repairs must be performed by trained personnel
AFTER DAILY USE
1. Drain and rinse out the recovery tank (Figure 83).
See DRAINING TANKS.
FIG. 83
2. Remove the debris tray and empty (Figure 84).
FIG. 84
3. Remove and clean the float shut-off screen (Figure
85).
FIG. 85
4. Drain and rinse out the solution tank (Figure 86).
FIG. 86
5. Disk scrub head - Turn pad over or replace when
worn (Figure 87).
FIG. 87
Orbital scrub head - Turn the work pad over or
replace when worn (Figure 88).
FIG. 88
6. Insta-Click pad driver/brushes - clean any debris
buildup from hub connection area (Figure 89).
FIG. 89
