OPERATION
20
Tennant T300 (02- 2016)
When supervisor controls are configured for the
operator mode, a login screen will appear at start
up (Figure 46 ). Enter the login number assigned
by the supervisor and press the green arrow to
access the operator home screen. See
SUPERVISOR CONTROLS instructions at back of
manual.
FIG. 46
2.
For first time users, press the help icon on the
operator home screen (Figure 44). The help
screen, shown below, will allow you to select a
different display language, help identify control
panel icons and view start-up operator videos
(Figure 47).
FIG. 47
Press the home screen icon at anytime to
return to the operator home screen.
3.
Press the down pressure icon to display the
down pressure scale (Figure 48). Press the (+)
symbol to increase down pressure. Press the (- )
symbol to decrease the down pressure.
FIG. 48
4.
Press the solution flow icon to display the
solution flow scale (Figure 49). Press the (+) symbol
to increase solution flow. Press the (- ) symbol to
decrease the flow solution or to turn it off.
FIG. 49
5.
Press the maximum scrub speed icon to
display the maximum speed scale (Figure 50).
Press (+) symbol to increase the maximum scrub
speed. Press the (- ) symbol to decrease the
maximum scrub speed. Only accessible in
Supervisor Mode.
FIG. 50
6.
Models equipped with Severe Environment
option - Press the Severe Environment icon once
to dispense cleaning detergent for 30 seconds. The
icon will turn green and a 30 second count down
timer will start. For continuous dispensing of
detergent, press and hold the icon for 2 seconds
until a continuous timer is displayed. Press the icon
at anytime to turn off. (Figure 51). The icon will
blink yellow when the severe environment tank
needs to be refilled.
FIG. 51
