12
4.2
Start the operation
1.
Place the unit on a sturdy and level surface in a safe, dry place, away from
laboratory traffic.
2.
Ensure that the AC power switch is OFF, and then plug the three-pronged power
cord one end into a grounded three-prong AC outlet with appropriate voltage
(100V to 240V as indicated on the rating sticker near the AC cord on the back of
the unit), and plug the other end into the main power socket.
3.
Connect the DC output jacks from the electrophoresis unit; insert the red lead (+)
into the red output jack, and the black lead (-) into the black output jack.
5
Press to move cursor left forward between
parameters
6
Press to move cursor right forward between
parameters
7
Press to move cursor up between parameters and
to increase numeric values
8
Press to move cursor down between parameters
and to decrease numeric values
OFF
Plug in
