15
Ø
Press
to switch pages between real-
time value display and value set up page.
Ø
Press
Key to temporarily interrupt power to ongoing electrophoresis without
terminating the operation. The LED is flashing. Press
Key to resume the run.
Ø
Press the
Key again to stop electrophoresis and to terminate a timed run.
Ø
If you need to make changes to the values of parameters
during current running but do not want to terminate the time
run, you may pause electrophoresis by pressing the
Key. Press
Key to enter the setting screen.
Adjust the values and then press
Key to resume your
operation.
Ø
If you want to change values of parameters and start a new
operation run during current running, press
Key instead
of
. After adjusting the values press
Key once again
to start a new operation run.
Note: After stopping and restarting an operation, the timer resets to selected time and does
not take into account the time that electrophoresis was in progress before it was stopped.
Ø
When the run is completed, operation stops with alarm and
is
displayed on the screen. Press
Key to terminate a timed run, and turn the
AC power OFF by the switch on the back.
Note: It would take some time (about 5 seconds) for the unit to power off.
