14
Ø
Use
Key and
Key to select
Constant Mode
, and then press either
or
to enter the next page.
Ø
Use
and
to select ether Constant
Voltage(V) or Constant Current(mA) or Constant
Power(W), and then press
or
to enter
the next page
Ø
Use
and
to move cursor to the
parameter such as voltage (V) current (mA) or
power (W) or time (min.). Press
Key to set
the specified parameter.
Ø
Ø
Use
or
to set the appropriate value,
and then press
Key, and move to the next
parameter until all the parameters are set in the
same operation method.
Ø
Press
Key to start electrophoresis. The LED
is lit, and the screen will show the real time
parameter values.
Ø
When parameters reach the assigned value, the
color would turn orange.
Note: If the time value is set “0,” it indicates the power supplier will constantly
operate until user manually stops it.
