Chapter 2: Getting Started 53
C
all
a
p
honebook
n
uMber
1. Select the
Number
in the Phonebook list. The name and number appear in the display window.
2. Click
ON/OFF
button to dial the call.
»
TIP
: You can also double-click the number in the Phonebook list to initiate a call.
e
nd
a
Call
•
Click the
ON/OFF
button.
r
edial
a
n
uMber
•
Click the
Redial
button.
s
end
a
f
lash
signal
•
If your telephone service includes call transfer, call waiting or conference calling, you can use the
Flash
button on the dialer to invoke these features. Refer to your local telephone service provider for details.
Call Settings
M
uTe
/u
nMuTe
M
iCrophones
(a
ll
M
iC
Channels
)
1. Click the
Mute
button to mute all microphones.
2. Click the
Mute
button again to unmute all the microphones.
a
djusT
Call
voluMe
•
Use the
Up
and
Down
buttons to adjust the call volume to the desired level. This adjusts the output
chosen in the output channel drop down list.
r
eTurn
To
The
C
onfiguraTion
s
Creen
•
Click the
Switch to Flow Window
button to return to the configuration screen.
M
ode
•
Click either the
PC
button to communicate via Microsoft Office Communicator or Microsoft Lync, or
Telco
to switch the dialer back to its normal communication mode.
COMMUNICATIONS SETTINGS - INTERACT Pro
Your INTERACT system can be controlled through the network or through serial connection and USB.
Network Settings
»
NOTE
: Contact a Network Administrator for information on current network settings and
permissions. Settings must be applicable to NetBIOS protocols.
C
hange
ip s
eTTings
1. Create a unique network name and enter it in the
Network Name
field (default is ClearOne.)
2. If your network is DHCP enabled, the
IP Address
,
Subnet
and
Gateway
information will be filled in.
3. If your network is not DHCP-enabled or if you require a static IP address, clear the
Use DHCP
check box
and enter the
IP Address
,
Subnet
and
Gateway
addresses.
4. Select
Use DNS
if you have a Domain Name Server and want name resolution (to use a network name)
for your static IP address.
5. Click
Ok
to save the settings and close the window.