ClearOne interact at, User Manual, Page: 45 / 68

40 Technical Support: 800-283-5936
INTERACT COM SETTINGS - INTERACT AT
Click the Headset/USB/RF drop down to add a headset to the INTERACT mixer console. Once selected,
click the headset icon to launch the Headset USB Settings window.
Telephone Mode
s
eT
/l
ine
j
aCk
a
CTive and
h
eadseT
/inTeraCT CoM a
CTive
Check to adjust settings for this telephone mode.
l
evels
• Telco/Headset Rx : Adjusts the Telco/Headset Receive Levels
• Telco/Headset Tx : Adjusts the Telco/Headset Transmit Levels
• USB Rx : Adjusts the USB Receive Levels
• USB Tx : Adjusts the USB Transmit Levels
• Mute : Click the Mute button to mute any of the above settings.
inTeraCT CoM a
CTive
Check to adjust the headset configuration.
h
eadseT
C
onfiguraTion
• Telephone Set : Click the drop down to select the telephone set you will use with the headphone/USB
Breakout Box configuration.
• RJ 11 Pin Out : Choose the drop-down setting which best describes your pin out configuration.
• Speaker Gain : Adjusts headset Speaker Gain
• Mic Gain : Adjusts headset mic gain
• Telephone Line Echo Cancellation : (Default On) Activates/Deactivates Telephone Line Echo
Cancellation
• Non-Linear Processing : (Default On) Activates/Deactivates Non-Linear Processing
• Automatic Level Control : (Default On) Activates/Deactivates Automatic Level Control
usb C
onfiguraTion
• Standard Mode or Office Communicator/Lync Mode : Chooses between either Standard USB Mode
or Office Communicator Mode (used only with Microsoft Office Communicator or Microsoft Lync).
The USB Configuration is used to define the function of the “PC” button on the wired and wireless
controllers. When in Standard Mode, the PC button and the Telephone button on the controller have the
same function. In this mode, the controller is always used to initiate Telco calls, regardless of whether the
“PC” or “Telephone” button has been pressed.
However, when the USB Configuration is set to Office Communicator Mode, pressing the “PC” button
on the controller allows the controller to dial Office Communicator or Lync calls when OC or Lync are
running on the connected PC. When in this mode, the status displayed on the controller changes to
“Lync” when the “PC” button is pressed.