Chapter 2: Getting Started 49
MIXER CONSOLE - INTERACT Pro
The
Mixer Console
allows you to create mixes of audio and send them to specific outputs using a
matrix array similar to the ClearOne Converge Pro line. This allows you greater flexibility in setting up your
conferencing environment. The audio inputs are shown along the left side of the window and the audio
outputs are along the top.
»
NOTE
: There are several routing paths that are inactive. This is to prevent audio from being
routed back to the source and creating feedback.
Mixer Options
Any number of input-to-output connections can be made in the matrix, with level control at each cross point.
Any input or combination of inputs can be routed to any output or combination of outputs.
The matrix appears with the current routing configuration displayed for all channels. The functionality of the
matrix screen is described in the following sections.
The routing legend shows the status of cross points using colored cells that mark the intersection or cross
point of the routing from input to output. The color of the cross point cell identifies the input type:
i
npuT
r
ouTing
•
To route an input to an output, click in the routing matrix at the intersection between the input and the
output. A Mic Input can be designated as gated (yellow). All other input cross points will be colored
green.
»
NOTE
: The current
Crosspoint Level
is shown to the nearest dB.
Black cells are restricted routing paths which prevent Telco, Headset RX, USB RX and Processing channels
from being routed back to themselves.
C
lear
M
aTrix
b
uTTon
Press the
Clear Matrix
button to clear ALL current matrix settings. A
Confirm
dialog appears asking you
to confirm the clear matrix operation. Use caution when using this feature because the operation cannot be
undone.
a
udio
r
ouTing
M
aTrix
The numbers and letters along the top and left side of the matrix show the cross point coordinates. The
Labels for each channel are also shown to make them easy to identify. As you move the cursor over the
matrix, the labels for the channels are highlighted in white for each cross point.
»
NOTE
: Clicking on a channel label opens the Channel screen for that channel group, allowing
you to modify the channel label and change channel configuration settings as needed.