Chapter 2: Getting Started 35
MIC AND MIC EX SETTINGS - INTERACT AT ONLY
Level
The
Level
tab lets a user adjust level settings for each of the INTERACT MIC’s three microphones
independently.
•
Fine Gain
: Use the slider to adjust Fine Gain for each Mic Input independently
•
Level Meter
: Displays current levels for each Mic Input
•
ALC
: Click the
ALC
button to activate Auto Level Control for each Mic Input independently
•
Mute
: Click the
Mute
button to mute each input independently
•
P Pwr
(MIC EX only): Click the
P Pwr
button to enable Phantom Power for the Mic channel.
Processing
The processing tab adds processing and filters to each microphone based on user preference.
•
AEC
: Click the
AEC
button to activate Acoustic Echo Cancellation
•
NLP
: Default is Soft. Click a radio button to set the Non-Linear Processing level or deactivate the feature.
•
NC
: Click the
NC
button to activate/deactivate Noise Cancellation. Use the slider to adjust the amount of
noise cancellation used for that microphone.
•
Speech Lift
: Click the
Speech Lift
button to route the microphone’s audio to the Loudspeaker output.
Use the
Speech Level Slider
to set the desired level (the default is -6 dB).
•
Filter
: Click to apply filtering to each independent Mic Input.
•
Start by clicking
Add Filter
°
Adjust the filter placement by moving the point along the grid (Hz, dB/deg).
`
Alternatively, click
Table View
to apply a list view.
°
To adjust the active filter, click the fields along the top row.
`
Active Filter
: Selects the filter to adjust
`
Type
: Sets the type of filter applied
`
Frequency
: Adjusts the frequency of the filter
`
Gain
: Increases or decreases gain applied to the filter
`
Q
: Increases or decreases the Q applied to the filter
`
Bandwidth
: Adjusts the filter’s bandwidth
`
Bypass
: Bypasses the filter completely
°
To add phasing to a filter, click
Phase
°
Click
Bypass All
to override all filter settings
°
Click
Remove Filter
to delete the selected filter
°
Click
Close
to apply settings and close the window
°
To remove an existing filter, open the
Processing
tab, click
Remove Filter
and
Close
.