Chapter 2: Getting Started 19
NETWORK CONNECTION
Network Connection allows you to connect to any INTERACT system on your network using an IP address or
a unique network name.
Using Network Find
o
pen
The
n
eTwork
f
ind
Click the
Network Find
button on the toolbar (or use the menu option
Tools->Network Find
).
»
NOTE
: INTERACT Software will automatically detect units located on the same subnetwork.
You only need to use Network Find to locate units outside of the subnetwork. This is based on
the assumption that your LAN is configured correctly. If your LAN is not configured correctly,
please refer to your IT Administrator.
C
onneCT
To
a
s
ysTeM
on
The
n
eTwork
1. Enter the
IP Address
or
Network Name
of the system to which you want to connect.
2. Click
Ok
.
3. You will see a
Password Prompt
window. Enter the
User Name
and
Password
of the networked
system.
4. Click
Ok
. The system icon will appear in the Connection list and the Configuration screen will open.
PHONEBOOK
INTERACT Software features a Phonebook utility which stores up to 20 phone numbers. These numbers are
also assigned a speed dial number for dialing convenience through the INTERACT Controller. Phonebook
entries are listed in alphabetical order, speed dial number or number. You can add, edit or delete an entry
from the Phonebook window.
Phonebook Edit
o
pen
The
p
honebook
•
Click the
Phonebook
button on the toolbar (or use the menu option
Tools->Phonebook Edit
).
a
dd
a
n
uMber
1. Click
Add
2. Enter the
Name
and
Number
.
3. Enter a
Speed Dial Number
(
1-20
). If you don’t enter a speed dial number, INTERACT Software will
automatically assign one. Alternatively, the user can assign a speed dial number of
None
which will
prevent a speed dial number from being assigned.
4. Click
Ok
d
eleTe
a
n
uMber
1. Select the entry you want to delete.
2. Click
Delete
e
diT
a
p
honebook
e
nTry
1. Select the entry you want to edit, click
Edit
.
2. Make desired changes to the entry.
3. Click
Ok
. Confirm the deletion.