manualshive.com logo in svg

ClearOne interact at, User Manual, Page: 27 / 68

Share
Download
ClearOne interact at User Manual Download Page 27

22 

Technical Support:   800-283-5936

Upload Firmware

1.  Click the 

Firmware Loader

 button on the toolbar.

2.  Click the 

File

 button

3.  Browse to the correct file located in INTERACT Software folder:

C:\Program Files\ClearOne\Interact\1.0\firmware

4.  Click 

Open

5.  Click the 

Update

 button.

6.  The 

File Transfer Progress

 bar will indicate when the firmware has been uploaded.

 

»

Note: Once the update is complete the unit will reboot. When the firmware is updated and the 
unit rebooted, it returns to the default settings. 

INTERACT COM UPDATER

Updates and enhancements to your INTERACT system are made available through new software and 
firmware releases which can be downloaded from the ClearOne Web site. Once you have installed the new 
software version, you will need to upload new firmware files to your INTERACT units. The Updater works for 
both the COM as well as the COM-W devices.

Connect to the INTERACT unit

 

»

NOTE

: Your INTERACT COM must be linked to your INTERACT unit. Correct linking and 

power will be indicated by a blue light on the front of the INTERACT COM.

u

pdaTe

 f

irMware

1.  Connect the INTERACT COM to your Computer with a USB cable. If you are asked to install drivers 

follow the onscreen wizard.

2.  Once the INTERACT COM is connected, click the 

INTERACT COM Updater

 button on the toolbar (or 

Tools/INTERACT COM Updater).

3.  Click the 

Select File

 button

4.  Browse to the correct file located in 

C:\Program Files\ClearOne\Interact\1.0\firmware

5.  Click 

Open

6.  Click the 

Update

 button.

During the upgrade process you may be asked to install drivers; these USB device drivers are necessary to 
continue the INTERACT COM update. Follow the prompts in the 

Device Driver Wizard

 to complete driver 

installation and INTERACT COM Update.

Summary of Contents for interact at





































































Reviews:

No comments