Operator's Manual: Models CB-1500 & CB-2500 (230 V / 50 Hz)
3-14
Locking the Burner Into Firing Position
NOTE:
Your furnace is now assembled and ready for installation. Install the furnace
as soon as possible so the burner and/or blower are not "bumped" or damaged. If you
must store the furnace for a period of time before installation, make sure it is located in a
safe, secure area.
1.
Swing the burner into firing position.
2.
Install and tighten the lock-down nut on the mounting
plate bolt to secure the burner in its firing position.
3.
Plug the burner electrical cable into the receptacle on the
top of the burner housing.
4.
Tighten the locking ring to secure the electrical cable.
NOTE:
Be sure to properly align the plug when plugging it into
the receptacle. See Fig 3I.
Figure 3I - Detail of Burner
Electric Receptacle
PLUG ON CAM
LOCK CABLE
SLOT IN PLUG
MUST ALIGN WITH
SLOT IN
RECEPTACLE
RECEPTACLE ON
TOP OF BURNER
I88354A
Summary of Contents for CB-500 series
