Clatronic DVD 534 HC, Instructions For Use Manual

Page: 46 / 76

Childproof lock
How the childproof lock works:
To protect children from watching films that are not suita-
ble for their age, some DVDs and video CDs contain a
special coding.
Special »substitute Scenes« are even stored on some
CDs. If an »age limitation« has been selected then these
stored scenes are automatically played back. If the »age
limitation« you have selected is so low that the contents
of the CD is no longer meaningful then the CD can no
longer be played back.
If the Childproof lock is not actively selected (NO PAREN-
TAL) then all CDs inserted into the drive can be played
back.
Note:
– Please note that not all dangerous films contain this
coding. Check the safety function of the film to make
sure.
– If a correspondingly coded DVD is played back when
the childproof lock is activated then this is only possi-
ble after a 4-digit safety code has been entered.
Setting or changing the safety code:
To do this, the DVD receiver must be in STOP mode.
Press »ENTER« button 21; the PASSWORD CHANGE
PAGE appears on the screen.
First enter your OLD PASSWORT (4-digit numeric code)
using the numeric keys »1-0«. »3308« has been set at
the factory. Now you just have to re-enter the NEW PAS-
SWORD twice.
To store the password, press »ENTER« button 21. To be
on the safe side, you should make a note of your safety
code. Fade out the menu by pressing
»SETUP« button 20.
Note:
If you forget your safety code (PASSWORD) then you can
reset the code to »3308«.
– Press
»ADJ/VOL +« button 41 of the remote control
and keep it pressed.
– Now press »STEP« button 40.
– The following now appears on the screen:
PARENTAL CODE CANCELLED.
Switching on or off the childproof lock:
To do this, the DVD receiver must be in STOP mode.
Select the required settings for the childproof lock using
the
» / « 21 buttons. If the childproof lock is not to be
activated, then select NO PARENTAL.
Confirm the setting using »ENTER« button 21 and enter
the 4-digit safety code using the numeric keys »1-0«. Re-
press »ENTER« button 21 and fade out the menu with
»SETUP« 20.
Resetting to the original factory settings
On resetting the device, the following basic settings are
reset to the original condition when leaving the factory.
Menu display: Factory sett.:
Picture format TV DISPLAY NORMAL/PS
TV standard TV TYPE MULTI
Video Output VIDEO OUT CVBS
Info camera angle ANGLE ON
Menu language OSD LANG ENGLISH
Audio output AUDIO OUT ANALOG
Screen saver SCR SAVER OFF
Audio mode AUDIO MODE STEREO
Dual tone DUAL MONO STEREO
Dynamic control DYNAMIC 8/8
Sound language AUDIO ENGLISH
Language of subtitles SUBTITLE OFF
CD menu DISC MENÜ ENGLISH
Childproof lock PARENTAL ALL
Volume VOLUME 6
To do this, the DVD receiver must be in STOP mode.
Use » « button 21 to select RESET and »ENTER« but-
ton 21 to confirm. Now switch off the device and then
back on using the
»POWER« 6 switch. The device is now
ready for delivery.
Note:
The safety code for the childproof lock is not reset by re-
setting the device.
46
AUDIO 1 G
SUBTITLE 2
DISC MENU 3 PG
PARENTAL 4 PG 13
PASSWORD 5
DEFAULTS 6 PG - R
7 NC - 17
MAIN PAGE ADULT
NO PARENTAL
- - PREFERENCES PAGE - -
SET TO NO PARENTAL
OLD PASSWORD:
NEW PASSWORD:
NEW PASSWORD:
PASSWORD CHANGE PAGE
PLEASE ENTER OLD PASSWORD
childproof lock without age delimitation
only with adults
children under 12 years only with adults
children under 16 years only with adults
not under 16 years
only for adults
no childproof lock
TV DISPLAY
TV TYPE
VIDEO OUT
ANGLE MARK
OSD LANG
AUDIO OUT
SCR SAVER
ON
OFF
MAIN PAGE
- - GENERAL PAGE - -
SCREEN SAVER OFF
SETUP MENÜ PREFERENCES PAGE PASSWORD
SETUP MENU PREFERENCES PAGE PARENTAL
SETUP MENU PREFERENCES PAGE DEFAULTS
DVD 534 HC - GB 25.06.2002 10:00 Uhr Seite 46