Audio output (AUDIO OUT):
Select….
ANALOG, when the speakers are connected directly
to
»SPEAKERS«
55 or the DVD sound is transmit-
ted to another device via
»AUDIO OUT«
52.
SPFIF/RAW, when a Dolby Digital receiver or DTS or
MPEG decoder is connected to the
»OPTICAL
OUT«
or
»COAXIAL OUT«
54.
SPDIF/PCM, when a receiver that can process the
PCM sound signal is connected to the
»OPTICAL
OUT«
o
»COAXIAL OUT«
54.
Note:
If the audio output is selected incorrectly then
the sound can not be heard or is heard poorly.
Video output (VIDEO OUT):
Select...
CVBS, when
»VIDEO OUT«
connector 48 is connec-
ted to the television.
RGB, when
»SCART OUT«
46 is connected to the te-
levision.
YUV, when
»S-VIDEO OUT«
47 is connected to the
television.
Setting the menu language (OSD SPRACHE):
Switch on the device at the power switch
»POWER«
6. If
necessary, select the video input at the television. Switch
to DVD operation by pressing the
»DVD«
button 28.
Press
»SETUP«
20.The main menu appears on the scre-
en. The
GENERAL SETUP
line is highlighted.
By pressing the
»ENTER«
button 21,
GENERAL PAGE
will appear.
Using button
»
«
select
OSD-LANG
to change the menu
language.
Press
»
«
21and highlight the desired language with
»
/
«
21.Confirm the setting with
»ENTER«
button 21.
Press
»SETUP«
20 to leave the menu.
Setting the TV standard (TV TYPE):
(Proceed the same as when setting the menu language;
the device must be switched on and in DVD operating
mode).
– Press
»SETUP«
20; the main menu appears.
The
GENERAL SETUP
line is marked.
– Press
»ENTER«
21; the G
ENERAL PAGE
appears.
– Using
»
«
21 the
TV TYPE
will be selected.
– Press
»
«
button.
– Using
»
/
«
21; to select the TV standard.
– Press
»ENTER«
21 to confirm your selection.
– Use
»SETUP«
20 to leave the menu.
Setting the audio output (AUDIO OUT):
(Same procedure as when setting the menu language;
the device must be switched on in DVD operating mode).
– Press
»SETUP«
20; the main menu appears and the
GENERAL SETUP
line is highlighted.
– Press
»ENTER«
21; the
GENERAL PAGE
appears.
– Use
»
«
21 to select
AUDIO OUT
.
– Press
»
«
.
– Use the
»
/
«
to select the audio output.
– Press
»ENTER«
21 to confirm your selection.
– Use
»SETUP«
20 to leave the menu.
Setting the video output (VIDEO OUT)
(Proceed the same as when setting the menu language;
the device must be switched on and in DVD operating
mode).
– Press
»SETUP«
button 20; the main menu appears.
The
GENERAL SETUP
line is highlighted.
– Press
»ENTER«
button 21; the
GENERAL PAGE
ap-
pears.
– Use
»
«
button 21 to select
VIDEO OUT
.
36
SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCES
EXIT SETUP
GOTO GENERAL SETUP PAGE
- - GENERAL PAGE - -
TV DISPLAY
NORMAL/ PS
TV TYPE
NORMAL/ LB
VIDEO OUT
WIDE 16:9
ANGLE MARK
OSD LANG
AUDIO OUT
SCR SAVER
MAIN PAGE
- - GENERAL PAGE - -
TV DISPLAY
TV TYPE
VIDEO OUT
ANGLE MARK
OSD LANG
GERMAN
AUDIO OUT
ENGLISH
SCR SAVER
FRENCH
ITALIAN
MAIN PAGE
SPANISH
SET OSD LANGUAGE
TV DISPLAY
TV TYPE
VIDEO OUT
ANGLE MARK
OSD LANG
AUDIO OUT
ANALOG
SCR SAVER
SPDIF/RAW
SPDIF/PCM
MAIN PAGE
- - GENERAL PAGE - -
SELECT AUDIO OUTPUT
TV DISPLAY
TV TYPE
MULTI
VIDEO OUT
NTSC
ANGLE MARK
PAL
OSD LANG
AUDIO OUT
SCR SAVER
MAIN PAGE
- - GENERAL PAGE - -
SET TV STANDARD
DVD 534 HC - GB 25.06.2002 10:00 Uhr Seite 36
