7
EN
G
LIS
H
32
36
86
80
12
13A
28
26
79
13
86
33
81
34
35
32
36
86
80
12
13A
28
26
79
13
86
33
81
34
35
Step 1
1. Attach the front foot (2) and rear foot (81) to the base frame using two bolts (), washers (4) and cap
nuts (5) on each foot.
2. If the floor is uneven, the rear foot (81) has an individual height adjuster on both sides.
. The front foot (2) has transportation wheels, which need to face towards the front of the Cross Trainer.
Step 2
1. Fit the plastic collar (79) over the handlebar
post and then pass the computer cable (1A)
up from the base frame and connect it to the
computer cable (1) in the handlebar post.
2. First unscrew the pre-assembled bolts and
then secure the handlebar post (12) to the
base frame (86) using four M8x20 bolts (28)
and four washers (26).
. Attach the round plastic collar (79) part of
the way up the handlebar post using
a piece of sticky tape so that it is not
in the way during assembly. Do not
tighten the bolts (28) yet.
Summary of Contents for ER-6472C
Page 2: ......