manualshive.com logo in svg

Clarity RetCam Shuttle, User Manual, Page: 152 / 177

Share
Download
Clarity RetCam Shuttle User Manual Download Page 152

Maintenance and Support

            

151

RetCam 3 and RetCam Shuttle User Manual

PN 18-000393 Rev. A

12

Maintenance and Support

This section covers the regular maintenance and support of the RetCam 3 and RetCam 
Shuttle systems. The activities covered include:

•

Recommended General Maintenance Schedule on page 151

·

Cleaning Procedures on page 152

·

Disposal of Materials on page 153

·

Cable and Connections Inspection on page 154

•

RetCam 3 Maintenance on page 154

·

RetCam 3 Fuse Replacement on page 154

·

RetCam 3 Illumination Lamp Replacement on page 156

•

RetCam Shuttle Maintenance on page 160

·

RetCam Shuttle Fuse Replacement on page 160

·

RetCam Shuttle Illumination Lamp Replacement on page 161

•

General Support Issues on page 165

·

Key Validation on page 165

•

Technical Support on page 167

·

Technical Support Contact Information on page 167

·

Service Information on page 167

Unauthorized modifications or additions to the RetCam System (including 
hardware and software, etc.) void the warranty and could adversely affect 
system function.

Recommended General Maintenance Schedule

The RetCam 3 and RetCam Shuttle systems require regular general maintenance to keep 
them operating as designed. This section describes the general maintenance schedule 
and recommended processes:

•

Between patients:

 Clean and inspect the lens piece.

•

Weekly: 

Wipe down the system.

•

Monthly:

 Inspect cables and connections for wear. 

Summary of Contents for RetCam Shuttle


















































































































































































Reviews:

No comments