manualshive.com logo in svg

Clarity RetCam Shuttle, User Manual, Page: 34 / 177

Share
Download
Clarity RetCam Shuttle User Manual Download Page 34

Introduction

            

33

RetCam 3 and RetCam Shuttle User Manual

PN 18-000393 Rev. A

Storage

For storage of the system when not in use, disconnect the power cord and store it in one 
of the storage boxes. Stow the handpiece in its compartment behind the upper door and 
the footswitch in its compartment behind the lower door. Remove all loose objects from the 
work surfaces. Close the notebook computer and consider removing it to a secure 
location. Wipe the surfaces with a soft cloth. Apply the brakes to all casters to keep it in 
place.

Figure 13

Shuttle With All Items Stowed

Transport

The system is designed to be transportable, both within and between hospitals, clinics and 
offices. 

NOTE

The system has no internal power supply (no battery) to support image 
acquisition when disconnected from a wall outlet. (The notebook computer 
can operate using its own battery.) 

To relocate the system within a building:

1.

Power down the system through the software by selecting 

 and then 

Shutdown

. 

2.

Switch OFF mains power on the back of the unit. Unplug the power cord from the wall 
outlet and drape it over the transport handle.

3.

Secure the handpiece inside the storage compartment. 

4.

Ensure the notebook is secured to cart or removed for transport to avoid damage if 
dropped.

5.

Unlock the caster brakes.

6.

Gently roll the system on all four casters to the new location. Move the system slowly 
to minimize vibration. Once in the new location, apply the caster brakes, plug in the 
power cord, and restart the system.

Summary of Contents for RetCam Shuttle


















































































































































































Reviews:

No comments