manualshive.com logo in svg

Clarity RetCam Shuttle, User Manual, Page: 23 / 177

Share
Download
Clarity RetCam Shuttle User Manual Download Page 23

            

22

Chapter 1 

Introduction

RetCam 3 and RetCam Shuttle User Manual

PN 18-000393 Rev. A

Figure 3

Computer Electro-Optical (CEO) Box

NOTE

It is not necessary to remove any of the connectors for storage or 
transportation.

Do not remove any connections while the system is powered ON. The main 
power switch must be OFF prior to connecting or disconnecting any cables 
from the CEO box. 

Do not look directly into the Lamp (Fiber Optic) opening when the CEO box is 
ON. 

NOTE

To access the Handpiece Focus connector or the Camera Handpiece 
connector, remove the front cover panel.

The 

Handpiece Focus

 connector is a direct insert receptacle for insertion of the (white) 

focus motor cable, which is part of the handpiece interconnect harness. 

To insert the cable, align the red dot on the connector with the red dot on the Focus port 
and insert. To detach, pull back on the connector, being careful not to pull on the cable. 

NOTE

The Handpiece focus connector is not threaded. 

The 

Camera Handpiece

 connector is a receptacle for insertion of the black camera 

controller cable, which is part of the handpiece interconnect harness.

Fiber Optic Illumination Port

Handpiece focus

Camera Handpiece connector

Summary of Contents for RetCam Shuttle


















































































































































































Reviews:

No comments