Clare Controls 16-Channel NVR with PoE, User Manual

Page: 41 / 188

30 Network Video Recorder User Manual
Chapter 3
Introduction to Live View
Introduction to Live View
Operations in Live View mode
The Live View mode functions are listed below.

Single Screen : Shows only one screen on the monitor.

Multi-screen: Shows multiple screens on the monitor simultaneously.

Auto-switch: The screen is auto switched to the next one. You must set the
dwell time for each screen on the configuration menu before enabling
auto-switch.
Menu > Configuration > Live View > Dwell Time.

Start Recording: This starts recording, continuous record and motion
detection record are supported.

Output Mode: Select the output mode; Standard, Bright, Gentle or Vivid.

Playback: Playback the recorded videos for current day.

Aux/Main output switch: The NVR checks the connection of the output
interfaces. The priority level for the main and aux output is HDMI > VGA >
CVBS. This means if the HDMI is used, it is the main output. If HDMI is not
used, the VGA output is set as the main output. See Table 12.

Next screen: Moves to the next screen.

Previous screen: Returns to the previous screen.

Menu: Displays the Live Mode menu.

Add IP camera: Adds an IP camera to Live Mode.