Clare Controls 16-Channel NVR with PoE, User Manual

Page: 10 / 188

Network Video Recorder User Manual 1
Chapter 1
Introduction
Introduction
Front panel
Figure 1: 64-Channel NVR front panel
Table 1: 64-Channel NVR control panel buttons
No. Name Description
1 Status Indicators ALARM Turns red when a sensor alarm is detected
READY Blue when the device functions properly
STATUS Turns blue when an IR remote controls the device
Turns red when controlled by a keyboard and purple when the IR
remote and keyboard are used at the same time
HDD Blinks red when data is being read from or written to HDD
MODEM Reserved for future use
TX/RX Blinks blue when the network connection is functioning properly
GUARD Guard indicator turns blue when the device is in armed status
The indicator turns off when the device is unarmed. Pressing and
holding the ESC button for more than three seconds in Live View
mode can change the arm/disarm status.
2 IR Receiver Receiver for the IR remote