Clare Controls 16-Channel NVR with PoE User Manual Download Page 37

Page: 37 / 188

Chapter 2: Getting Started

Network Video Recorder User Manual

To configure customized protocols:

Click the Protocol button in the Add IP Camera (Custom) interface to enter

the Protocol Management interface.

There are sixteen customized protocols provided in the system. You can edit

the protocol name and choose whether to enable the sub-stream.

2. Choose the protocol type, and then choose the transfer protocols.

Note:

The network camera must support the protocol and transfer protocol

types.
After adding the customized protocols, the protocol name displays in the

drop-down list.

3. Select the protocol you added to validate connection to the network camera.

Summary of Contents for 16-Channel NVR with PoE





























































































































































































Search results

Summary of Contents for 16-Channel NVR with PoE

Reviews:

Brands by name

Popular brands

Clare Controls 16-Channel NVR with PoE, User Manual

Search results

Summary of Contents for 16-Channel NVR with PoE

Reviews:

Brands by name

Popular brands