Clare Controls 16-Channel NVR with PoE, User Manual

Page: 111 / 188

Chapter 8: Alarm Settings
100 Network Video Recorder User Manual
Full screen monitoring
When an alarm is triggered, the local monitor (VGA, HDMI, or BNC monitor)
displays in full screen
If alarms are triggered simultaneously in several channels, their full-screen
images are switched at a ten second interval (default dwell time). You can set a
different dwell time by going to Menu > Configuration > Live View > General >
Full Screen Monitoring Dwell Time.
Auto-switch terminates once the alarm stops. You are then taken back to the Live
View interface.
Note: You must select the Trigger Channel settings for the channels you want to
make full screen.
Audible warning
This triggers an audible beep when an alarm is detected.
Notify surveillance center
This sends an exception or alarm signal to the remote alarm host when an event
occurs. The alarm host refers to the PC installed with Remote Client.
Note: The alarm signal transmits automatically at detection when a remote alarm
host is configured.
Email linkage
Send an email with alarm information to a user or users when an alarm is
detected.
Trigger alarm output
Trigger an alarm output when an alarm is triggered.
1. Enter the Alarm Output interface.
Menu > Configuration > Alarm > Alarm Output
2. Select an alarm output and set alarm name and dwell time. Click Schedule
button to set the arming schedule of alarm output.
Note: When you select Manually Clear from the Dwell Time list, you can only
clear it by going to Menu > Manual > Alarm.