Clare Controls 16-Channel NVR with PoE, User Manual

Page: 15 / 188

Chapter 1: Introduction
6 Network Video Recorder User Manual
Figure 3: 4-Channel and 8-Channel NVR front panel
Table 3: 4-Channel and 8-Channel NVR control panel buttons
No. Name Description
1 Power The POWER LED turns green when NVR is powered up.
2 Status READY: The LED is green when the device is running normally.
STATUS:
1) The light is green when the IR remote control is enabled.
2) The light is red when the function of the composite keys (SHIFT) is used.
3) The light is out when none of the above condition is met.
ALARM: The light is red when there is an alarm occurring.
HDD: The LED flashes red when HDD is reading/writing.
3 Tx/Rx TX/RX LED flashes green when network connection is functioning normally.
4 USB USB connector.
IR remote control operations
The included IR remote controls the NVR, shown below. The keys on the remote
control closely resemble the ones on the front panel.
Note: Install batteries (2 × AAA) before operation.
1 2 3 4