Clare Controls 16-Channel NVR with PoE, User Manual

Page: 121 / 188

Chapter 9: Network Settings
110 Network Video Recorder User Manual
Configuring server and HTTP ports
You can change the server and HTTP ports in the Network Settings menu. The
default server port is 8000 and the default HTTP port is 80.
To configure the server and HTTP ports:
1. Enter the Network Settings interface (Menu > Configuration > Network).
2. Click the More Settings tab to enter the More Settings interface.
3. Enter the server port and HTTP port in the text fields.
4. The default server port is 8000.
Note: The server port is set in the range of 2000 to 65535. Use it for remote
client software access. The HTTP port is used for remote IE access. The
default HTTP Port is 80. You can change them according to your
requirements.
5. Click Apply to save and exit the interface.
Configuring Advanced
You can enable Virtual Host in the Advanced tab. You can then click a link on the
NVR, view the specified IP camera’s web page, and change the IP camera’s
advanced settings.
To configure the Advanced settings:
1. Enter the Advanced menu (Menu > Configuration > Network Settings >
Advanced).
2. Check the Enable Virtual Host check box.