Clare Controls 16-Channel NVR with PoE, User Manual

Page: 20 / 188

Chapter 1: Introduction
Network Video Recorder User Manual 11
Rear panel
Figure 7: 64-Channel NVR rear panel
Table 7: 64-Channel NVR rear panel connections
No. Name
Description
1
VIDEO OUT BNC connector for video output.
2
CVBS AUDIO OUT BNC connector for audio output. This connector is
synchronized with CVBS video output.
VGA AUDIO OUT BNC connector for audio output. This connector is
synchronized with VGA video output.
3 LINE IN BNC connector for audio input.
4
RS-232 Interface Connector for RS-232 devices.
5
VGA DB9 connector for VGA output. Display local video output
and menu.
6
HDMI HDMI video output connector.
7
eSATA (Optional) Connects external SATA HDD, CD/DVD-RM.
2 eSATA interfaces.
8 LAN Interface 2 network interfaces.
9 Termination Switch RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120 Ω resistance.
10 RS-485 Interface Connector for RS-485 devices. T+ and T- pins connect to
R+ and R- pins of PTZ receiver respectively.
Controller Port D+/D- pin connects to Ta, Tb pin of controller. For
cascading devices, the first NVR’s D+/D- pin connects with
the D+/D- pin of the next NVR.
ALARM IN Connector for alarm input.
ALARM OUT Connector for alarm output.
11 GROUND Ground (connect before starting the NVR).
12 AC 100 to 240 V
AC 100 to 240 V power supply.
13 POWER
Switch for turning on/off the device.
14 USB interface Universal Serial Bus (USB) ports for additional devices
such as USB mouse and USB Hard Disk Drive (HDD).