Clare Controls 16-Channel NVR with PoE, User Manual

Page: 133 / 188

Chapter 10: RAID
122 Network Video Recorder User Manual
3. Edit the Array Name; set the RAID Level to RAID 0, RAID 1, RAID 5 or RAID
10; and select the Physical Disk that you want to configure array.
Notes

If you choose RAID 0, at least two HDDs are installed.
 If you choose RAID 1, two HDDs are configured for RAID 1.

If you choose RAID 5, at least three HDDs are installed.
 If you choose RAID 10, four, six, or eight HDDs are configured for RAID
10.
4. Click OK to create an array.
Note: If the number of HDDs you select is not compatible with the
requirement of the RAID level, the error dialog displays.
5. Click the Array tab to view the successfully created array.
6. Click to select an array, and then click Create Virtual Disk to enter the Create
Virtual Disk interface.
Note: The device supports creating up to eight virtual disks.