Description
Default
Field Type or
Choices
Field
Defines the method for sending the
requested polling data.
If the
Respond mode
is requester, the
response is automatically sent to the HTTP
server running at the address where the
request was made.
Requester
Requester
URL
Respond mode
When the
Respond mode
is set as URL,
this field defines the URL of a valid HTTP
server that gets the response.
You must enter the URL. This can be a
different address than the requester.
String
URL
Push Settings
When you configure push settings, consider that when a phone receives a push request, it reacts differently
based on the following:
• If a phone is in a call and receives a push with a priority of High, Important, or Normal, the phone accepts
the push but does nothing.
• If a phone receives a push request when it is in Do Not Disturb (DND) with:
• Total Silence—The phone does not make any sound and only displays visual notification. The phone
stays in Total Silence mode after the push request.
• Alarms Only and Priority Only—The phone changes mode to Normal, presents visual notification,
and plays the notification sound. The phone stays in Normal mode after the push request.
Use the following settings to configure push settings.
Table 86: Push Settings
Description
Default
Field Type or
Choices
Field
Defines the username for the Web API to
do any kind of push.
String
Username
Defines the password for the Web API to
do any kind of push.
String
Password
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
123
Cisco App Configuration
Push Settings
