Description
Default
Field Type Or
Choices
Field
Sets the amount of shaking of the phone
that is required to trigger an alarm.
Level 1 is the least sensitive. An alarm
triggers if there is quite a bit of jostling.
Level 7 is the most sensitive. An alarm
triggers if the user walks quickly or runs.
Disabled
Disabled
Level 1 (lowest)
Level 2
Level 2
Level 2
Level 2
Level 2
Level 7 (highest)
Running sensitivity
Sets the length of time in seconds that the
user would have to maintain the configured
degree of shaking (or a more severe
degree).
10
Integer 10–60
Running timeout
(seconds)
The Snooze feature allows the user to
temporarily suspend Emergency motion
monitoring. To activate this feature, set the
timeout in seconds 1–300. By default, the
Snooze feature is disabled (set to 0).
0
Integer 0–300
Snooze timeout
(seconds)
Sets the warning timeout in seconds. This
is the amount of time between the trigger
of the warning and the alarm state. In the
alarm state, an emergency call might be
placed or an alarm is sent to an external
security application.
10
Integer 10–60
Warning timeout
(seconds)
Related Topics
Access the Cisco App Settings on the Phone
, on page 65
Panic Button Settings
When the user activates an enabled Panic button, an alarm displays on the phone until the user cancels it. By
default, the Panic Button is disabled.
Use the following settings to configure the Panic Button.
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
69
Cisco App Configuration
Panic Button Settings
